Dell EMC Inspiron 3671 Скачать руководство пользователя | Manualshive

Страница: 42 / 73

background image

Removing the processor fan and heat-sink

assembly

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

NOTE:

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you

touch it.

CAUTION:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your

skin can reduce the heat transfer capability of the thermal grease.

Prerequisites

Remove the

Procedure

1. Pry and release the tabs that secure the fan shroud to the processor fan and heat-sink assembly.
2. Lift the fan shroud off the processor fan and heat-sink assembly.

3. Disconnect the processor-fan cable from the system board. (FAN CPU)
4. In reversed order (as indicated on the system board), loosen the four captive screws that secure the processor fan and heat-sink

assembly to the system board.

5. Lift the processor fan and heat-sink assembly along with its cable off the system board.

28

42

Removing the processor fan and heat-sink assembly

«
...
40
41
42
43
44
...
»

Содержание Inspiron 3671










































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 3671

GDR 1501 Series

Бренд: ESTERS ELEKTRONIK Страницы: 17

EloPOS 15'' Series

Бренд: Elo Touch Solutions Страницы: 39

Бренд: CELLmatic Страницы: 51

Бренд: Moxa Technologies Страницы: 16

Ergoplan Workstation

Бренд: Knight Страницы: 12

Бренд: IEI Technology Страницы: 24

Бренд: IEI Technology Страницы: 75

Бренд: Mitsubishi Страницы: 77

Бренд: Alpha Microsystems Страницы: 110

Бренд: Faytech Страницы: 2

Бренд: EAI Страницы: 94

Бренд: Tangent Страницы: 2

Nuvo 2500 Series

Бренд: Neousys Technology Страницы: 154

Crouse-hinds series

Бренд: Eaton Страницы: 30

Бренд: Compaq Страницы: 24

Бренд: IBM Страницы: 54

Бренд: Panasonic Страницы: 32

Бренд: MSI Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды