Replacing the graphics card
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Procedure
1. Ensure the securing tab on the system board is pushed away from the graphics-card slot.
2. Align the notch on the graphics card with the tab on the graphics card slot, and then press down firmly until the graphics card snaps
into place.
NOTE:
The securing tab will move to a closed position when the graphics card is replaced correctly. Remove the
graphics card and repeat the procedure if the securing tab does not close.
3. Rotate the card-retention bracket and align the screw hole on the card-retention bracket with the screw hole on the chassis.
4. Replace the screw (#6-32x6.35) that secures the card-retention bracket to the chassis.
Post-requisites
.
27
Replacing the graphics card
41
Содержание Inspiron 3671
