manualshive.com logo in svg

Dell EMC G7 7590, Руководство по обслуживанию

Поделиться
Скачать
Dell EMC G7 7590 Скачать руководство пользователя страница 16

Removing the base cover

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Procedure

1. Loosen the two captive screws on the base cover.
2. Remove the seven screws (M2x7) that secure the base cover to the palm-rest assembly.

NOTE: 

The two captive screws when released will create a gap which can be used to pry and lift the base cover off 

the palm-rest assembly.

3. Pry the base cover from the rear side using a plastic scribe.
4. Pry the base cover from the tabs on the palm-rest assembly and lift the base cover off the palm-rest assembly.

6

16

Removing the base cover

Содержание G7 7590









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды