![background image](http://html1.mh-extra.com/html/dell-emc/e46s001/e46s001_installation-and-service-manual_2468272149.webp)
Figure 106. Cable routing - 8 x 3.5-inch drive backplane
1
Drive backplane
2
SATA A cable (BP: BP_A to MB: SATA_A)
3
SATA B cable (BP: BP_B to MB: SATA_B)
4
System board
5
Cable guiding latch
Rear drive cage
Removing the rear drive cage
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
4
Disconnect all the cables from the rear drive backplane.
Steps
1
Using Phillips #2 screwdriver, loosen the screws that secure the drive cage to the system.
2
Pull and hold the screws to lift the drive cage away from the system.
Installing and removing system components
149
Содержание E46S001
Страница 28: ...System information label Figure 17 PowerEdge R540 Service information 28 Dell EMC PowerEdge R540 overview ...
Страница 30: ...Figure 21 Rear drive installation 30 Dell EMC PowerEdge R540 overview ...
Страница 75: ...Figure 29 Inside the system without rear drive cage Installing and removing system components 75 ...