Dell EMC E46S001, Инструкция по установке и обслуживанию

Страница: 105 / 184

Processor Configuration Memory population Memory population information
Single rank sparing population order A{1}, B{1}, A{2}, B{2}, A{3},
B{3}...
Populate in this order, odd amount per
processor allowed. Requires two ranks
or more per channel.
Multi rank sparing population order A{1}, B{1}, A{2}, B{2}, A{3},
B{3}... Populate in this order, odd amount per
processor allowed. Requires three
ranks or more per channel.
Removing a memory module
Prerequisites
1 Follow the safety guidelines listed in Safety instructions .
2 Follow the procedure listed in Before working inside your system .
3 If applicable, Removing the air shroud
WARNING: Allow the memory modules to cool after you power off the system. Handle the memory modules by the card edges
and avoid touching the components or metallic contacts on the memory module.
Steps
1 Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory module or
metallic contacts.
2 Push the ejectors outward on both ends of the memory module socket to release the memory module from the socket.
3 Lift and remove the memory module from the system.
Figure 56. Removing a memory module
Installing a memory module
Prerequisite
Follow the safety guidelines listed in Safety instructions .
Steps
1 Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory module or
metallic contacts.
Installing and removing system components 105