Figure 43. Installing the storage controller card
Next steps
1
Install the following:
a
b
c
2
Follow the procedure listed in
After working inside your system
.
System battery
Replacing the NVRAM backup battery - Option A
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. See the
safety instructions that came with your system for additional information.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Remove the following:
a
b
86
Installing and removing system components
