Dell EMC DP4400 Скачать руководство пользователя | Manualshive

Страница: 24 / 88

background image

Figure 10 Removing a hard drive

3. If you are not replacing the hard drive immediately, insert a hard drive blank in the empty

hard drive slot to maintain proper system cooling.

Install the hard drives

Before you begin

CAUTION

Before attempting to remove or install a hard drive while the system is running, see

the documentation for the storage controller card to ensure that the host adapter is
configured correctly to support hard drive removal and insertion.

CAUTION

Mixing hard drives from previous generations of PowerEdge servers is not

supported.

CAUTION

SATA hard drives are not supported in the DP4400.

CAUTION

When installing a hard drive, ensure that the adjacent drives are fully installed.

Inserting a hard drive carrier and attempting to lock its handle next to a partially installed
carrier can damage the partially installed carrier's shield spring and make it unusable.

CAUTION

When a replacement hot swappable hard drive is installed and the system is

powered on, the hard drive automatically begins to rebuild. Ensure that the replacement hard
drive is blank or contains data that you wish to overwrite. Any data on the replacement hard
drive is immediately lost after the hard drive is installed.

1. Follow all safety guidelines.

2. If applicable, remove the hard drive blank.

Procedure

1. Press the release button on the front of the hard drive to open the release handle.

2. Insert the hard drive into the hard drive slot and slide until the hard drive connects with the

backplane.

3. Close the hard drive release handle to lock the hard drive in place.

Remove and replace assemblies

24

Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures

«
...
22
23
24
25
26
...
»

Содержание DP4400

























































































Отзывы:

Нет отзывов

Похожие инструкции для DP4400

Бренд: Juniper Страницы: 483

Sourcefire 3D System

Бренд: Source fire Страницы: 280

Бренд: Check Point Страницы: 4

Бренд: Lanner Страницы: 64

Бренд: Black Box Страницы: 3

H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET...

Бренд: 3Com Страницы: 158

Бренд: Netgate Страницы: 56

Бренд: Netgate Страницы: 65

Бренд: Advantech Страницы: 23

VPN Firewall Portfolio

Бренд: Alcatel-Lucent Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды