Dell EMC D13U Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 90

Dell EMC D13U Скачать руководство пользователя страница 86

Table 12. Power adapter specifications (continued)

Description

Values

Temperature range:

Operating

0°C to 40°C (32°F to 104°F)

Storage

-40°C to 70°C (-40°F to 158°F)

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex 7090
Ultra.

Table 13. GPU—Integrated

Controller

External display support

Memory size

Processor

Intel UHD Graphics

●

Up to four
displays supported
via DisplayPort Multi-
Streaming Technology
(MST)

●

One DisplayPort 1.4
support over USB 3.2 Gen
2 Type-C port

●

One Thunderbolt 4 port
with DisplayPort Alt
Mode/USB4

●

One DisplayPort 1.4 ++
HBR2 support over rear
standard DP port

Shared system memory

11

th

Generation Intel Core i3

processor

Intel IrisXe Graphics

●

Up to four
displays supported
via DisplayPort Multi-
Streaming Technology
(MST)

●

One DisplayPort 1.4
support over USB 3.2 Gen
2 Type-C port

●

One Thunderbolt 4 port
with DisplayPort Alt
Mode/USB4

●

One DisplayPort 1.4 ++
HBR2 support over rear
standard DP port

Shared system memory

11

th

Generation Intel Core

i5/i7 processor

NOTE:

For 8K60P video playback support, we recommend to use 128-bit (dual channel) DDR4-3200 memory, at least 16

GB with dual channel (8 GB + 8 GB) memory sizes.

Powering the system

This system can be powered using a 90 W adapter (4.5 mm input power source) or through the USB Type-C cable connected
to a display capable of providing power delivery of 90 W or greater. During normal operation, when the device is connected
with a single power source (primary power source), connecting a second power source and disconnecting the primary power
source will shut down the device. However, if the secondary power source is disconnected while the primary power source is
connected, the system continues to operate normally.

86

Specifications of OptiPlex 7090 Ultra

«
...
84
85
86
87
88
...
»

Содержание D13U



























































































Отзывы:

Нет отзывов