Keys
Navigation
<Tab>
Moves to the next focus area.
NOTE:
For the standard graphics browser only.
<Esc>
Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.
<F1>
Displays the System Setup help file.
System Setup options
NOTE:
Depending on the computer and its installed devices, the items listed in this section may or may not appear.
Table 18. General
Option
Description
System Information
Displays the following information:
•
System Information: Displays
BIOS Version, Service Tag, Asset Tag, Ownership Date,
Manufacture Date,
and the
Express Service Code
.
•
Memory Information: Displays
Memory Installed, Memory Available, Memory Speed,
Memory Channels Mode, Memory Technology, DIMM 1 Size,
and
DIMM 2 Size
.
•
PCI Information: Displays
SLOT1, SLOT2, SLOT3, SLOT4, SLOT5_M.2
•
Processor Information: Displays
Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor
L3 Cache, HT Capable,
and
64-Bit Technology.
•
Device Information: Displays
SATA-0, SATA-1, SATA-2, SATA-3, LOM MAC Address, Video
Controller
Boot Sequence
Allows you to specify the order in which the computer attempts to find an operating system from
the devices specified in this list.
•
Legacy
•
UEFI
(default)
Advanced Boot Options
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is enabled.
UEFI Boot Path Security
Options:
•
Always, Except Internal HDD
(default)
•
Always
•
Never
Date/Time
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Table 19. System Configuration
Option
Description
Integrated NIC
Allows you to control the on-board LAN controller. The options are:
•
Enable UEFI Network stack
•
Disabled
•
Enabled
•
Enabled w/PXE (default)
NOTE:
Depending on the computer and its installed devices, the items listed in this
section may or may not appear.
18
System setup
Содержание ChengMing 3988
Страница 1: ...ChengMing 3988 Setup and specification guide Regulatory Model D19M Regulatory Type D19M005 ...
Страница 5: ...3 Connect the display 4 Connect the power cable Set up your computer 5 ...
Страница 6: ...5 Press the power button 6 Set up your computer ...
Страница 27: ...Serial IO driver Verify if the drivers for Touchpad IR camera and keyboard and are installed Software 27 ...