Dell EMC 6WDJR, Инструкция по установке и обслуживанию

Страница: 82 / 129

Installing optional IDSDM or vFlash card
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions .
2 Follow the procedure listed in the Before working inside your system .
3 Remove the air shroud.
Steps
1 Locate the IDSDM/vFlash connector on the system board. To locate IDSDM/vFlash connector, see System board jumpers and
connectors section.
2 Align the IDSDM/vFlash card with the connector on the system board.
3 Push the IDSDM/vFlash card until it is firmly seated on the system board.
Figure 56. Installing optional IDSDM or vFlash card
Next steps
1 Install the MicroSD cards.
NOTE: Reinstall the MicroSD cards into the same slots that are based on the labels you had marked on the cards during
removal.
2 Install the air shroud .
3 Follow the procedure that is listed in After working inside your system .
Removing the MicroSD card
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions .
2 Follow the procedure listed in the Before working inside your system .
82 Installing and removing system components