Dell EMC 6WDJR, Инструкция по установке и обслуживанию

Страница: 43 / 129

Installing the optional front bezel
Prerequisite
1 Follow the safety guidelines listed in the Safety instructions .
NOTE: The bezel key is part of the bezel package.
Steps
1 Align and insert the tabs on the bezel into the slots on the chassis.
2 Press the bezel until the release button clicks in place.
3 Lock the bezel.
Figure 14. Installing the optional front bezel
System cover
Removing the system cover
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions .
2 Power off the system, including any attached peripherals.
3 Disconnect the system from the electrical outlet and peripherals.
Steps
1 Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the lock counterclockwise to the unlock position.
2 Open the release latch until the system cover slides back.
3 Lift the cover from the system.
Installing and removing system components 43