Deliberant DLB70XX, Руководство пользователя

Страница: 32 / 69

31
Advanced Settings
These settings are only for more technically advanced users who have sufficient knowledge about wireless LANs. These
settings should not be changed unless you know what effect the changes will have on your device. The default setting is
optimized for the normal operation.
NOTE: Any unreasonable value change from the default settings will reduce the throughput of the device.
Authentication Type
The device supports two Authentication Types
“Open system” and “Shared Key”. When you select “Shared Key”, you need to
setup
the “WEP” key in the “Security” page (See the next section). The default setting is “Auto”. The wireless client can
associate with the device by using one of the two types.
Fragment Threshold
The fragmentation threshold determines the size at which packets are fragmented (sent as several pieces instead of as one
block). Use a low setting in areas where communication is poor or where there is a great deal of radio interference. This
function will help you to improve the network performance.
RTS Threshold
The RTS threshold determines the packet size at which the radio issues a request to send (RTS) before sending the packet. A
low RTS Threshold setting can be useful in areas where many client devices are associating with the device, or in areas where
the clients are far apart and can detect only the device and not each other. You can enter a setting ranging from 0 to 2347