Quick Installation Guide
Installation
deliberant
Page 10
APC Assembling and Mounting
The APC Propeller 2 and APC Propeller 5 units are supplied with mounting hardware
for pole or wall installations. Follow the steps for APC Propeller 2 or APC Propeller 5
assembling and mounting on a preferable surface.
Step 1.
Make sure that the APC unit is powered-off.
Step 2.
I
nsert the UTP cable into the
APC unit’s ETH port through the insert
bracket (tem 2 in the
) and as displayed in
the picture below:
It is recommended to use shielded STP Ethernet cable to reduce
exposure of the electromagnetic noise.
Step 3.
Connect unit with the insert bracket (item 2 in the
):
Содержание APC Propeller 2
Страница 2: ......
