![background image](http://html1.mh-extra.com/html/delfield/186114-ptb/186114-ptb_specification-sheet_2465986001.webp)
PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
Short Form Specifications
Exterior top
is constructed of one-piece 18-gauge stainless steel, with
integral 2.12" (5.4cm) high square nosing at the front. Top has a
mechanically cooled refrigerated raised rail at the rear with openings
to accommodate 2000 series pans (provided by others). Pans rest on
a recessed stainless steel bracket. Rail interior is 22-gauge stainless
steel. Raised rail openings have 20-gauge stainless steel removable
lids. Unit is equipped with separate expansion valve and on/off switch
for refrigerated rail. Temperature in top openings maintains 33°F (1°C)
to 41°F (5°C) with pans recessed 2” (5.1cm) at 86°F ambient room
temperature, meeting NSF 7 requirements.
Exterior back and bottom
are 24-gauge galvanized steel. Exterior ends
are finished with stainless steel.
Base interior
has aluminum back and bottom. Base interior ends and
door frames are thermoformed ABS plastic. Each interior door section
has (1) 25” (63.5cm) deep removable epoxy coated wire shelf adjustable
to (2) positions. Base is insulated with 2” (5.1cm) high density foamed
in place polyurethane. End of base has a machine compartment with
condensing unit installed. Rear machine compartment covered by a
louvered panel.
Self Closing Door(s)
have 22-gauge stainless steel exterior front, with
a thermoformed ABS plastic interior liner.
Drawers
— (2) high are standard.
Refrigeration system
uses HFC-404A refrigerant. Cabinet has a blower
coil assembly with expansion valve (1) on 48”, 60” and 72” models,
(2) on 91”, 99” and 114” models, located behind door mullion. Base is
equipped with independently controlled thermostat, solenoid valve and
condensate evaporator. Refrigerated base maintains temperature of 36°F
(2°C) to 40°F (4°C). Recessed on/off switches for rail and base are
located in front above the louver.
Electrical connections
are 115 volts, 60 Hertz, single phase. Unit is
wired with 3-wire, grounded, maximum 8’ (2.4m) cord and plug.
Casters:
Equipment is mounted on 5” (12.7cm) diameter casters; overall
height of casters is 6.13” (15.6cm).
18600PTB
Self-Contained Refrigerated Pizza Tables
Optional Accessories & Modifications
505B
Stainless steel back
505F
Laminate facing (full front)
906E
Laminate end
905A
Laminate back
107F
Tray racks
1030C
Cutting board (.5” x 20”)
1027B
Legs, set of four
1027D
Legs, set of six
605C1
18” deep single tier stainless steel overshelf
102E
19” wide refrigerated drawers (3) high for 4”
deep pans replacing door
102F
27” wide refrigerated drawers (3) high for 4”
deep pans replacing door
102G
32” wide refrigerated drawers (3) high for 4”
deep pans replacing door
108
Lock
213
*220V/50 cycle electrical system
• Additional shelf (specify door size)
* Inclusion of this option will alter the electrical
specifications of the unit
Model 18660PTB
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.