DELAIR UX11 Скачать руководство пользователя страница 16

Страница: 16 / 94

User Manual UX11

2.2.2

Recommended tablets

The

Delair Flight Deck

software has been fully tested and optimized on the following Android tablet

models, which Delair recommends for monitoring your aircraft during flight:

• Samsung Galaxy Tab S2 (SM-T819)
• Panasonic Toughpad FZ-A2 (Android 6.0 - WWAN 4G - GPS - WLAN - 32GB SSD)
• Huawei Mediapad M5

Please note that this list may change. Check your sales representative for more information.

2.3 Delair Link communication module

As an option, you can control the aircraft using the

Delair Link

communication module.

2.3.1

Overview

N°

Description

Antenna 2.4 GHz for aircraft communication

USB-C connector for battery charging

(1)

Buttons and screen

(1)

The charger is included in the standard toolkit.

Delair

676, Rue Max Planck – 31670 Toulouse-Labège, France

Tel: +33 (0) 5 82 95 44 06

| www.delair.aero

Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse

This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.

Содержание UX11































































































Результаты поиска

Содержание UX11

Отзывы:

DELAIR UX11, Руководство пользователя, Страница: 16 / 94

Результаты поиска

Содержание UX11

Отзывы: