Del Morino RES, Руководство по эксплуатации и обслуживанию

Страница: 9 / 39

9
B
EFORE BEGINNING DIGGING
a) Verify the oil level inside the multiplier (see page 12 point a).
b) Grease the machine (see page 13).
c) Move to the working area.
d) Stop the tractor then engage the parking brake.
e) Switch on the PTO.
f) Lower the two stabilizers pushing the levers “1” e “4”.
g) Remove the safety stop that prevents the arm rotation.
T
O BEGINNING DIGGING
a) Move people and animals at least 15 m (6 ft) away and be sure that there are no objects within 15 m (6
ft).
b) If it is necessary to shift the arm with respect to the tractor proceed as follows:
1) Unlock the 4 nuts that lock the arm to the main frame. If the machine is a RES30 turn the
lever to release the hydraulic lock.
2) Turn the arm fully in the direction of the shifting.
3) Open the bucket and put it into the ground.
4) Move the arm to shift the mobile frame.
5) When in position, lock the 4 nuts or turn the lever to engage the hydraulic lock.
c) Start the digging operation using the levers “2” e “3”.
A
T THE END OF DIGGING OPERATION
a) Shift the mobile frame to the middle of the main frame.
b) Close the arm upon itself, turn it to the transport position and lock it with the safety pin.
c) Raise the two stabilizers completely.
d) Switch off the tractor PTO.