36FB, 54FB
TURF BEAST
Rev: Mar2011
T
URF BEAST
Finish Mower
21
Troubleshooting
Problem Possible
Causes Solution
Mower will not move
forward or reverse
1. Brake
ON
2. Bypass levers pulled out
1. Release brake on control panel
2. Ensure bypass pins are retracted
Cannot move mower
when the engine is off
1. Bypass not engaged
1. Pull left and right bypass pins and set them in slots
in the chassis (p. 11)
Engine is overheating
1. Dirt in the fuel line
2. Dirty air filter
3. Low engine oil
4. Fouled
spark
plug
5. Misuse of the mower
6. Dull
blades
7. Spindle
bearing
failure
1. Replace fuel filter and flush tank
2. Clean or replace the air filter
3. Add
engine
oil
4. Replace spark plug
5. Mow slower, wait for grass to dry out
6. Sharpen cutting blades
7. Take in for service
Grass not cut smoothly or
cleanly
1. Dull
blades
2. Mowing too fast for conditions
3. Grass is wet or bent over
4. Blade is bent
5. Tire pressure not equal
6. Deck is set at uneven heights
7. Blades are set upside down
8. Excessive grass and debris
build up underneath the deck
1. Sharpen
blades
2. Slow down while cutting
3. Let grass dry to stand up
4. Replace blade
5. Add air pressure to low tires
6. Set deck at equal heights
7. Take blades off and install correctly
8. Clean out debris
Mower always pulls to
one side
1. Controls out of adjustment
2. Transmission
failure
1. Adjust controls (p. 11)
2. Take in for service
