background image

Owner’s Manual 

This manual contains important safety instructions for the gasoline engine powered  

lawnmower models: 36B, 36BX, 36H, 36HX, 52H, 52HX 

 

READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY.  

SAVE THIS MANUAL. 

HAVE QUESTIONS OR NEED HELP? 

call 24 hrs / 7-days a week help-line:  [1] 800-393-0668   

or go to  www.DEKPowerUSA.com

 

DO NOT RETURN THIS LAWN MOWER  

TO THE STORE! 

Date of Purchase: 

_______________________ 

Location of Purchase:  

_______________________ 

Serial #  - Mower:  

_______________________ 

Serial # - Engine:  

_______________________ 

Serial # - Transmission 

_______________________ 

Have the following information ready when you call us: 

DEK® is registered trademark of GXi International, LLC   Clayton, NC 27520 USA 

No part of this publication can be printed or copied without written permission. 

Heavy Duty Power Equipment 

®

 

NOTE: 

Mower and engine life are ex-

tended greatly through the use 

of frequent lubrications, oil 

changes and providing routine 

maintenance.  To protect your 

investment, do not forget to 

perform routine maintenance. 

Содержание 36B






















Отзывы: