7. Select
Logon
to log on and connect to the controller(s).
• The state for the controller is updated:
•
If you encounter any problems with connecting, see
Troubleshooting
, for more information on connection
problems and solutions.
3.3.2 Change logged on user
You can easily switch the currently logged on user in PICUS for the controller(s) already logged on.
To change the currently logged on user, perform the following steps:
1. Select the
Connect
page.
2. Highlight the already logged on and connected controller from the list:
•
3. Select
User
from the right side panel.
4. You are prompted to select a
user
and enter a
password
.
5. Select the required
user
from the available list.
6. Enter the
password
for the selected
user
.
7. Select
Logon
.
The logged on
user
now changes to the new
user
.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 33 of 213
