3. Communication
3.1 Communication setup
A few parameters revolving around communication to the CIO can be accessed through the display. Through
the CIO tab in the USW, full access to all the CIO parameters is available. The CIO configuration menu is
accessed from the top menu bar of the USW.
1
3
2
4
5
6
7
8
1. CIO configuration menu
When you open the CIO configuration menu, the first page is Communication setup.
2. Read configuration from the controller
3. Write configuration to the controller
4. CAN bus setup
The CAN port for the CIO modules is illustrated as well as the communication port, which are both configured
in the USW parameter list.
5. Auto detect
If the CIO modules are already connected and have the correct ID, the USW can automatically detect the
number and composition of CIO modules by using the auto detect function.
6. Device navigation list
CIO 308 installation and commissioning
guide 4189341078 UK
Communication
DEIF A/S
Page 14 of 25
