28
www.degardo.de
TREVIA | STORUS | VARIA | ROVIO
Figure H/I – Theft prevention and stability
W
(Figure H) Anchor bolt (item No.: 205669)
Available for STORUS V, VARIA, ROVIO III/IV and TREVIA I/II/III/IV/V/900K/900Q
W
(Figure I) Base plate for screw fixing (item No.: 27676) or adhesive mounting (item no. 227677)
Available for STORUS V, VARIA, ROVIO III/IV and TREVIA I/II/III/IV/V/900K
1. The triangular base plate is mounted to the installation site either with three Ø 9mm screws (not
included) or a nie-wieder-bohren
®
adhesive adapter.
2. The flexible threaded rod is shortened to suit the size of the container. Check the table for the
length required.
3. The container is positioned over the base plate. The threaded rod is fitted through the hole and
secured with the lock nut.
If using the adhesive fitting, make sure the adhesive is left for a time to harden - see the instructions
provided with the product.
Models STORUS V, ROVIO III, ROVIO IV and TREVIA V use the same drilled holes as for rainwater
drainage when sited outdoors (see Fig. B). For the anchor bolt, these holes only need to be drilled
to Ø 20 mm.
Figure J
– Drilling markings
Models TREVIA I, TREVIA II, TREVIA III, TREVIA IV and TREVIA 900K however use specific holes.
Figure K – Fitting a water level indicator (item No.: 227678)
Available for STORUS V, VARIA, ROVIO III/IV and TREVIA I/II/III/IV/V/900K
Figure L – Fitting a flame insert (item No.: 227778)
Available for ROVIO III
Follow the notes in the instructions for use provided with the product.
Figure M – Fitting a fountain insert (item No.: 227777)
Available for ROVIO III
When using a fountain insert, ensure the container is in a stable position. If not, the water may not
flow evenly. The water used must be changed from time to time.
Follow the notes in the instructions for use provided with the product.
Fitting the table top
Available for STORUS III (item No.: 227771), STORUS IV (item No.: 227773), STORUS V (item
No.: 230633) and ROVIO III (item No.: 228110)
The insert in the table top fits into the planting area of the container.
Do not place heavy loads at the edge of the table top - danger of tipping. Do not exceed the
maximum load capacity given in the “technical data” for each model
