Defiro DEF-TSV2, Руководство пользователя

Страница: 8 / 14

3. Under the gate, pass the cable and cable interface through the washer and nut in
sequence, align the nut to the thread and tighten, as shown in the figure
4. Connect the power and network cable, the screen will start
5. Hold the post with both hands and turn it gently to adjust the angle of the gate, as shown
in the figure. According to the recognition interface, adjust the gate head to the proper
recognition angle.
Note: Do not connect the network cable, power cable, etc. at this time to avoid installation
trouble