Defiance Safe 1 Hour Fire Safe Instruction Sheet
Defiance Safe Model ESD104-A-HL
Issue 5 1-08
User’s can hold personal numbers between 2 to 17 digits long.
To Change Pin Method One To Change Pin Method Two
How to open your Electronic Digital Lock
How to set your personal code
Notes on changing personal codes
Troubleshooting
1.
Press
ENTER
(Green lamp lights up)
2.
Press
7 7 7 7
(Factory default code)
3.
Press
END
button (same as Enter)
You will hear an “OK” melody. Within 4 seconds
turn the knob right and open door
1.
Open
the door using existing code
2. Press the Button on the
INSIDE
of door
3. Enter
your
NEW CODE
4. Press
the
END
button (same as enter)
5. You will hear an “OK” Melody
6. Check
new
number
ENTER -> CODE ->END
1. Press
the
STORE
button
2. Enter the existing code
3. Press
the
Enter
button
4. Enter
your
NEW CODE
5. Press
END
button (same as Enter)
6. You will hear an “OK” Melody.
7.
Check new number
ENTER -> CODE ->END
Problem
: When code is entered Red lamp turns on and “ERROR” Melody played
Cause: Incorrect opening sequence was used (safe has detected incorrect code)
Solution: Check code and try again
Problem
: Safe won’t work or Safe won’t open after setting code
Cause: Incorrect opening or setting sequence was used 3 times in a row and the safe has
detected incorrect code. This triggers a time delay before re-entering the code
Solution: Allow safe “Time Out” for 10 min.
Problem
: All key buttons do not work except
STORE
key
Cause: The button on the inside of door was held in and not pressed.
Solution: This places the safe in protective mode. To remove this mode, enter the code as per
normal except substitute the “Store” button for “Enter”. EG
STORE
->
Personal Code
->
End.
Then open the safe as per normal
ENTER
->
Personal Code
->
End
1. Always check the new code with the
DOOR OPEN
2. Old numbers shall be replaced with new one
3. Codes must be between 2 and 17 digits long
4. Long delays between entering numbers may cause problems. After pressing the
button on the inside of door you must enter the code within 5 seconds
