PIR Sensor &
LED Light
Introduction
The Defender PIR Alarm with Key Fob is a simple, user-friendly indoor alarm unit, perfect for
installing in important rooms or access locations. Armed and operated using either the key fob or
the buttons on the side of the alarm, the device produces a 130dBs siren whenever the
8m PIR sensor is breached.
The alarm is battery operated and requires 2 x AA batteries, which are
included.
Contents
•
1 x PIR Alarm Unit
•
1 x Key Fob
•
1 x Mounting Bracket
•
1 x Adhesive Pad
•
2 x Fixing screws and wall plugs
•
2 x AA & 1 x CR2032 Batteries
Battery Installation
Please note
: the PIR Alarm and Key Fob come with batteries installed, please remove battery tab
before first use. The battery compartment is accessed from the rear of the alarm unit by remov-
ing the battery cover. Insert 2 x AA batteries (included) noting the correct polarity. The unit will
beep once to indicate the batteries are installed correctly. The unit is now ON. The LED light will
illuminate when the batteries need replacing in the alarm unit. To replace the batteries, repeat the
steps above.
NOTE:
The battery compartment contains an anti-tamper function, meaning the alarm will sound
when the battery cover is removed
even if the alarm is disarmed
. To change the batteries or
access the compartment, first turn the unit OFF by long pressing the Set button, until the alarm
beeps five times. The unit is now OFF and the batteries can be accessed.
The remote fob uses 1 x CR2032 battery. To replace, unscrew the screw at the base of the fob to
and open the fob. Replace the battery, noting the correct polarity.
Operating the Alarm Unit
To turn the unit ON, press and hold the Set button until the unit beeps once.
Note: when installing batteries, the unit will auto switch ON after the batteries are inserted.
To turn the unit OFF, long press and hold the Set button until the unit beeps five times.
To arm the alarm press the Set button once and the unit will beep once for arm.
To disarm the alarm press the Set button once and the unit will beep twice for disarm.
Press the Tone button to select the desired alarm tone. Each tone will sound briefly (six in total) as
you press. When you hear your preferred tone, simply stop pressing and it will auto save.
Press the Volume button to select the desired sound level (five in total). It will auto save as above.
PIR ALARM WITH KEY FOB
Motion Activated Household Alarm Product Code: EL00194
defendersecurityproducts.co.uk
Siren
Volume Button
Set Button
Tone Button
Arm
Disarm
Home
SOS
