7. Subwoofer Settings
You may drive an active subwoofer with outputs 3 and 4, however keep in mind these are an
exact, full range, stereo match to outputs 1 and 2. To begin, your subwoofer should be set at
mid-level gain, and the crossovers should be set at the mid-level setting. After you have the
system up and running, adjust the subwoofer level, phase and crossover to get the best
response.
8. USB Music Server Volume Setting Warning
If you are streaming digital music via a server such as foobar2000, JRiver, Roon, etc.,
begin
with the server application level set low
.
9. Using the EQ901 USB Remote Control
Page 7
EQ901 USB User Guide - Rev. 05242022 deercreekaudio.com
