DeepTech DISCRIMINATOR, Руководство пользователя

Страница: 5 / 24

INTENSITY METER -Shows target intensity as getting closer to
metal and also indicates battery life when unit is first turned on.
Battery is good if in the “battery good” level. Charge otherwise.
ON - OFF/SENS - knob to turn control unit on, show battery
voltage when turned on, and change how sensitive the coil is to
metal targets. Far left position is for very large or near surface
targets. BLACK DOT on control unit label is for standard
detection setting. Far right position is for the highest sensitivity to
targets. Setting too high will receive all nearby metal targets. Turn
down knob if unit is active too often.
TRESH -Is threshold or beginning of detection audio (sound). Set
Threshold to give one or two “ticks” per second.
RESET - Button to reset control unit in new ground conditions.
Depressing button one or more times is needed in each new target
area or if any other settings are changed. Pressing reset over metal
will ignore similar metal targets. The machine needs to be reset
over a clear area (not on targets), not including minerals in
ground.
LED INDICATOR -The red LED light on the intensity meter
indicates that the target within the detection range of the coil is
ferrous. Remember, that after each change of the Delay or
Sensitivity control’s setting, you should wait for the fading of the
led indicator to continue your search.
REAR PANEL OF CONTROL BOX
Built-in loudspeaker - For audible target indication
- 4 -