DeepTech DISCRIMINATOR, Руководство пользователя

Страница: 10 / 24

5. Connect the coil to the back of the unit.
6. Set the “Interference” knob to the middle position.
7. Turn all other knobs to the left (counterclockwise).
8. Set your Discriminating Mode (A/D, SA, A/ND).
9. Turn on unit and set the Sensitivity Knob to the black dot.
10. Slowly turn the Delay knob to the right (clockwise) until the
unit is not making any more noise.
11. Slowly turn the Threshold knob to the right until you are just
hearing one to two ticks per second.
12. Move in a forward, left, or right direction keeping the coil
level.
Discrimination works only on the 1m x 1m only. The 11” coil
does not have discrimination.
Quick Start Guide 1m x 1m Coil
1. Make sure battery is fully charged.
2. Attach the battery to the carrying case.
3. Plug in battery to back of unit.
4. Assemble the coil.
5. Connect the coil to the back of the unit.
6. Set the “Interference” knob to the middle position.
7. Turn all other knobs to the left (counterclockwise).
8. Set your Discriminating Mode (A/D, SA, A/ND).
9. Turn on unit and set the Sensitivity Knob to the black dot.
10. Slowly turn the Delay knob to the right (clockwise) until the
unit is not making any more noise.
11. Slowly turn the Threshold knob to the right until you are just
hearing one to two ticks per second.
12.Move in a forward, left, or right direction keeping the coil
level.
–
9 -