deeplet 16-CH Скачать руководство пользователя страница 20

Страница: 20 / 104

5.3 Video Adjustment

Left-click the mouse to select the

Video Adjustment

(Mouse:

)

In Menu display, the

Video Adjustment will be shown.

There are 4 items which can be adjusted, including Brightness, Contrast, Hue, and
Saturation. The operations are as below:



Numeric

(Mouse: Left-click the mouse to select the values)

Press these values to adjust the selected items.



Factory Reset This

(Mouse: Left-click the mouse to select this)

Press this button to reset the settings for this camera to factory default values.



Factory Reset All

(Mouse: Left-click the mouse to select this)

Press this button to reset the settings for all cameras to factory default values.



Restore

(Mouse: Left-click the mouse to select this)

Press this button to restore the values.



X (

Mouse: Left Click X or Right Click to leave

)

Press this button to escape from this screen, and return to Menu display. The settings
will be saved for future reference.

Содержание 16-CH









































































































Результаты поиска

Содержание 16-CH

Отзывы:

Бренды по названию

Популярные бренды

deeplet 16-CH, Руководство пользователя

Результаты поиска

Содержание 16-CH

Отзывы:

Бренды по названию

Популярные бренды