DEEP EAST SUPPLY Weblazer, Руководство пользователя

Страница: 6 / 6

6
5. OPERATION
5.1. EXTENDING RODS
1. Take hold of the tip and, with control, pull the end out until telescopic rod is fully extended. Grab each section, starting with the
second to largest, and pull tight to ensure each part is snug.
5.2. RETRACTING RODS
1. Hold the second to last (second to smallest) section of the telescopic rod and begin, with control, compressing the telescopic rod
back down into the larger sections. Ensure the end cap is fully inserted in the largest section.
CAUTION!
The last (smallest) section is thin and can damage easily if too much force is applied. Take hold of this last
section, nearest the next largest section, and compress from there to reduce risk of damage.
5.3. REMOVING RODS
1. Turn the ¼ Turn Fastener to the left and then pull the Adapter and Telescopic Rod off.