Dedrone
3 Unpacking
IM-Inst-DT2536en
7
3
Unpacking
This equipment should be unpacked and handled with care. Check the exterior of the packaging
for visible damage. If an item appears to have been damaged in shipment, notify the shipper
immediately.
To pull the Multi Sensor out of the foam, spread the foam a bit with hands. There is no need to
use tools.
4
Scope of Delivery
Verify that all the parts listed in the scope of delivery are included. If any items are missing,
notify your Dedrone Partner.
Do not use this product if any component appears to be damaged. Please contact Dedrone in
the event of damaged goods.
1 x
Multi Sensor
1 x
DT Wall Mount and DT Pole Mount
2 x
Straps
1 x
Bag with 2x screws Torx M5, 4x flat washer, 2x nuts
1 x
Bag with 1x environmentally sealed Ethernet crimp connector, 1x RJ45 Plug
1 x
Installation Manual
1 x
Safety Information
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.