DeDietrich ALEZIO EVOLUTION EASYLIFE AWHP 11 MR-2, Руководство пользователя, Страница: 54 / 68

1. Access the menus by pressing the two keys on the right simultane­
ously.
2. Select the Malfunction menu by pressing the key.
3. Select the PCB by pressing the or keys. The icon appears.
Confirm the PCB selection by pressing the key: the PCB name
appears.
Note
The
: parameter flashes. corresponds to the
number of stored errors.
4. Go to the error details by pressing the key.
5. Scroll through the errors by pressing the or key. When this
menu opens, the row of the error in the log appears briefly. The PCB
name appears. Go back to the error list by pressing the
h
key.
Note
The errors are stored from the most recent to the oldest.
6. Go back to the : display by pressing the
h
key. Press
the key: the parameter flashes after the errors. cor­
responds to the PCB selected.
Clear the error log by pressing the key.
7. Exit the Malfunctions menu by pressing the
h
key.
8.3 Troubleshooting
Problems Probable causes Corrections
The radiators are cold. The heating set point tem­
perature is too low.
Increase the value of parameter or, if a room thermostat is connec­
ted, increase the temperature on it.
The heating mode is deac­
tivated.
Activate the heating mode.
The radiator valves are
closed.
Open the valves on all radiators connected to the heating system.
The heat pump is not op­
erating.
Check that the heat pump is switched on.
Check the fuses and switches on the electrical installation.
The water pressure is too
low (< 1 bar).
Top up the system with water.
Fig.51
MW-2000369-1
Fig.52
MW
-5
0
0
0
0
1
1
-3
Fig.53
MW
-1
0
0
0
6
8
9
-1
Fig.54
MW
-1
0
0
0
6
9
0
-1
8 Troubleshooting
54 MIV-4 7623755 - v05 - 27042017