manualshive.com logo in svg

DeDietrich 200 ESL HYBRID 4-8, Руководство пользователя, Страница: 13 / 64

Поделиться
Скачать
DeDietrich 200 ESL HYBRID 4-8 Скачать руководство пользователя страница 13

Our liability as manufacturer may not be invoked in the 

following cases:

Failure to abide by the instructions on installing and 

maintaining the appliance.

Failure to abide by the instructions on using the 

appliance.

Faulty or insufficient maintenance of the appliance.

1.4.2 

Installer's liability

The installer is responsible for the installation and initial 

commissioning of the appliance. The installer must 

observe the following instructions:

Read and follow the instructions given in the manuals 

provided with the appliance.

Install the appliance in compliance with prevailing 

legislation and standards.

Carry out initial commissioning and any checks 

necessary.

Explain the installation to the user.

If maintenance is necessary, warn the user of the 

obligation to check the appliance and keep it in good 

working order.

Give all the instruction manuals to the user.

1.4.3 

User's liability

To guarantee optimum operation of the system, you 

must abide by the following instructions:

Read and follow the instructions given in the manuals 

provided with the appliance.

Call on a qualified professional to carry out installation 

and initial commissioning.

Get your installer to explain your installation to you.

Have the required inspections and maintenance 

carried out by a qualified installer.

Keep the instruction manuals in good condition close 

to the appliance.

1  Safety

7613346 - v06 - 02072019

200 ESL HYBRID

13

Содержание 200 ESL HYBRID 4-8

































































Отзывы:

Нет отзывов