dedaelementi.com
4.2.3 Mounting
In the case of mounting on the DCR frame, there are two types of assembly:
Assembly with s-dcr cover:
the cables will enter the nylon S-DCRcover (8) positioned under the stem,
passing through the spacers, the 56 mm cover (12) and black compression ring for DCR 45° × 45°
bearing or the grey ring if using a 36° × 45° bearing (14). Here below a picture showing the full internal
cables routing.
Assembly with s-dcr cover
: the cables will enter directly through the holes under the stem, passing
through the spacers, the 56 mm cover (12) and black compression ring for DCR 45° × 45° bearing or the
grey ring ifusing a 36° × 45° bearing (14). Here below a picture showing the full internal cables routing.
Fig. 4.3
internal cable routing view with S-DCR cover
Fig. 4.4
Internal cable routing view with DCR system
