Deda Elementi SL30DB, Руководство пользователя

Страница: 13 / 14

23
The wheels you have just purchased are high technolgy products that require
specific care and maintenance to fully obtain the maximum performance
advantages and to preserve them over time. So we recommend to follow simple
rules of use to avoid any kind of problem.
WarninG : Never clean the wheels and parts using high pressure and high
temperature water. The water pressure can overcome seals and bearings
protections systems causing damages irreparably or malfunfion of internal parts
of the hub. Never use solvents, chemicl products, petrol or similar substances,
over the hubs that can damage seals and rubber gaskets or remove the grease
from the bearings completely.
After the bicycle washing, dry every parts and components avoiding to store
water into the hollow points of the wheel ( for instance inside the rim and hub).
Frequently check the wear status of the wheels parts and if necessary make
the maintenance and/or parts replacement through the official Deda Elementi
dealers.
The recommended service intervals depend on the use and using condition of
the wheels. It is recommended to make an inspection after each riding season
or every time in case of bearing problems, wheel out of center or damaged
parts are apparent. Since specific tools and experience are necessary for hub
maintenance, wheel trueing or parts replacement it is recommended that the
service should be done by official Deda Elementi dealer.
For any service or replacement parts, only orginal Deda Elementi spare parts have
to be used in order to guarantee the product quality and the warranty maintaining.
ContaCtS
For any question or technical information please contact Deda Elementi by
visiting the website at www.dedaelementi.com and through the email address
info@dedaelementi.com.
Deda Elementi s.r.l reserves the right to modify without notice the content of
this manual always guaranteeing the avalaibility of the updated versions on the
website dowanload area.
CLeaninG, MaintenanCe anD repLaCeMent partS