Deda Elementi Jet Clip-On, Руководство пользователя

Страница: 10 / 18

10
en
g
WARNING
Always use a calibrated dynamometric key to tighten all screws when assembling
and adjust the extensions.
A tightening torque higher than recommended can lead to parts failure without
notice.
WARNING
For the shifter levers assembly follow the recommendations from the manufacturer.
The maximum tightening torque of the shifter lever must not exceed 4Nm.
4.1 JET ONE
1. Assembly the fixing plates (3a) on the handlebar and use the spacers (8
e 9) to adjust according to the desired height. According to the selected
spacers, use the appropriate length screws (11, 12, 13 or 14) to ensure the
correct assembly (see Fig. 1).
ASSEMbLY INSTRuCTIONS
Fig. 1
Spacers
bolt type
15 mm 30 mm
0 0 M5x25 mm
1 0 M5x40 mm
0 1 M5x55 mm
1 1 M5x70 mm