Deda Elementi Gera Alloy, Руководство по эксплуатации и обслуживанию

Страница: 16 / 28

dedaelementi.com
1. General safety information
• Install only bicycle tires compatible with rims
technical specifications included in this user’s
manual. The installation of tires not compatible
can damage the rim wheels, invalidate the Deda
Elementi Warranty and cause serious accidents
and injury for the user.
• Follow the minimum inflation pressure
recommended by the tire manufacturer.
Never exceed the maximum inflation pressure
permitted for this Deda Elementi rim of 7 bar /
100 psi. The use of inflation pressures out of this
range can damage the rim, invalidate the Deda
Elementi Warranty and cause serious accidents
and injury for the user.
• Read the whole User’s Manual carefully and
keep it in a safe place for later reference.
It is under user’s responsibility to check
regularly the product to determine the need
of maintenance or replacement. Wheels and
their components are products wearing during
the standard use of the bike, for that reason
we recommend users to regularly inspect their
bicycle and parts in order to find any damage.
If any doubts or problems occur, stop riding the
wheels and have them inspected by an official
Deda Elementi dealer or a qualified bicycle
technician.
• These wheels have been designed and intended
to be used on normal paved surfaces and gravel
roads. In case of use on off-road, wheels can be
subjected to damages, loose their functioning
and cause serious accidents and injury for the
user.
• Regularly check the wheels to make certain
that they are installed correctly to the bicycle and
fastened securely to the frame and fork.
• If any bicycle fall or accident occur, stop riding
the wheels and have them inspected carefully
by an official Deda Elementi dealer or a qualified
bicycle technician.
• Frequently check the status of the wheels parts
subjected to wear and if necessary make the
maintenance and/or parts replacement through
the official Deda Elementi dealers.
It is recommended to make an inspection after
each riding season or every time in case of
problems related to bearing, wheel out of center
or damages to single parts