7
10)
With the Deck Dolly preassembled, lay the unit over the deck and engage the
hook brackets with the tube on the mower deck’s factory mounts similar to what is
shown below. Once satisfied with the fit, you may now tighten the lower bracket bolts
insuring that the unit is square.
11)
With the Dolly laying on the mower deck with the hook brackets engaged with the
deck’s factory deck shaft, position the upper bracket with the front factory deck
mounts so that the j-hooks engage the Deck Dolly bracket and that should indicate the
proper set of holes to use. Once the appropriate set of holes is determined, drill those
holes out to 3/8” or larger. Insert the preassembled Upper Deck Support into those
holes. Make adjustments for proper fit. Dolly should appear as shown below.
