7
10)
With the Deck Dolly preassembled, lay the unit over the deck and align the
bottom support brackets with the rod in the deck mount so that it hooks in.
Depending on how it fits you may have to move the brackets to the other side of the
Upright. The brackets have two sets of holes and the key thing to remember is that
the wheels are close or just touching the ground when in the horizontal position. You
can move the brackets up if needed if any interference is found. The various holes
give you adjustability to conform to your deck. After insuring proper fit you may now
tighten those bolts.
11)
Once you are satisfied with the fit of the Dolly on your deck and squareness of the
dolly you may align and tighten the lower cross support tube when the brackets are
centered on the deck rod mount. Beginning from the bottom, tighten all bolts while
insuring alignment.
12)
Check all bolts for tightness before operating the Deck Dolly.
13)
Please take care to watch the lower deck wheels when operating the Dolly for
the first time. You may have to raise and turn the deck anti scalping wheels so they do
not catch on the ground. Assembly is complete.
Using The DeckDolly
Using the DeckDolly is a threes step process and is easy as:
