6
9)
Assemble the bottom bracket parts and tighten the 5/8
” bolt
and make a mirror image
pair.
9)
Assemble the brackets as shown below leaving bolts loose at this time.
10)
With the Deck Dolly preassembled, lay the unit over the deck and align the bottom
bracket 5/8
”
bolt with the decks factory auto connect mounts. Depending on how it fits
you may have to flip the brackets to the other side of the Upright as shown below.
Usually this happens if the
deck’s factory bracket touches the Deck Dolly’s wheel. The
point here is to carry the deck as low as possible without interfering with the Dolly.
Once satisfied with the fit, you may now tighten the bracket bolts. See picture below.
