Decathlon KIPRUN GPS 500, Руководство пользователя

Страница: 8 / 22

2.1 Start a free activity
1. From the "Time" screen press START
2. Select "Activity" mode
3. Select the sport
4. Select "Free", the satellite signal search and heart rate monitoring start automatically.
Note:
Your watch may need a few moments to determine your GPS position, especially at first use or
when used in a location far from the last use location or if the FASTFIX is not up to date.
We recommend that you remain still until signal detection is complete.
To optimise the reception of the signal, you are recommended to position yourself in as clear a
location as possible, away from surrounding buildings and not under any trees.
If you want to skip the signal search, you can press
​ START ​ and select ​ YES.
Note:
If you start your session without a GPS signal, you will have very little opportunity to detect it
later.
For a running or walking session, the accelerometer will measure speed and distance. The
accelerometer measurement is less precise and will not provide you with a route.
5. Once the signal is received, the watch automatically switches to the activity screen. To
start the activity press the ​ START ​ button and ​ ​ the timer will begin as well as the speed
and distance measurement.
6. Scroll through the different screens with the ​ LEFT ​ and ​ RIGHT ​ buttons
2.2 Pausing and stopping an activity
1. To pause an activity press ​ START
2. A screen appears on which you can see the total time of your activity as well as 3
menus:
- Go: resume your session
- Stop: stop your session
- Summary: see the summary of your session
3. To stop your session, choose "Stop" and select whether you want to save your session,
continue it later or cancel it and not save it.
8