0
1
M
A
T
T
H
E
W
H
I
L
T
O
N
PARTS
Seat and/or table modules to match your order
Leg bases to match your order
HARDWARE
(4x) M8x60 bolts per module
For connecting multiple bases, where relevant, the following
hardware per connection:
(4x) M8x15 bolts
(1x set)Connecting plate parts
(4x) M6x16 Panhead screws
YOU WILL NEED
4mm heavy duty Allen Key
6mm heavy duty Allen Key
The help of a friend
NOTES
NOTE 1: The assembly process is different for a sofa that rests
on one leg frame from a sofa that requires more than one leg
frame (such as a corner unit or extra long sofa). Pages 2 and 3
refer to the assembly of a sofa with one leg frame, and pages
4 through 8 refer to the assembly of a sofa with multiple leg
frames. Please turn to the correct pages for the unit ordered.
NOTE 2: Be certain that all assembly is carried out on a flat
and stable surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 3: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our document “Unpacking Your Furniture” for further details.
NOTE 4: Great care is required when assembling our products as
they can mark very easily if banged or dropped. Use blankets
to soften the assembly surface - hard surfaces such as wood or
stone flooring may damage the furniture if in direct contact.
NOTE 5: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 6: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
ASSEMBLY INSTRUCTIONS
391 HEPBURN MODULAR SOFA BY MATTHEW HILTON
DELAESPADA.COM
