0
1
M
A
T
T
H
E
W
H
I
L
T
O
N
PARTS
HARDWARE
8-10 black bolts for headboard (depending on bed size)
8 silver bolts
8 black bolts per side table (if relevant)
YOU WILL NEED
6mm and 5mm heavy duty Allen Keys
The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a flat
and stable surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone flooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in A poor connection.
NOTE 6: All mating parts are numbered so they correspond to
the appropriate part around the frame of the bed. you will
ensure the best possible fit if all parts are mated with the
corresponding numbered parts. While you work, be sure all
connections are flush with no gaps.
ASSEMBLY INSTRUCTIONS
HEPBURN BED
DELAESPADA.COM
1x Headboard
2x Platforms
2x Leg frames
Side table(s)
if relevant
