DDC DRC-11525 Скачать руководство пользователя | Manualshive

Страница: 24 / 85

background image

Data Device Corporation

SB-3622X Manual

11

APPLICATIONS SOFTWARE INSTALLATION

Windows Software Overview

There are several software applications which are used in conjunction with

SB-3622X

PCI Cards. These applications are included with your card, and

include a Console Application, a Graphical User Interface and a Synchro.dll
file.

If you did not receive the application software described on the following
pages with your card, please contact DDC customer service.

MOTION FEEDBACK BOARD MANAGER APPLICATION

A MOTION FEEDBACK BOARD MANAGER Application contained in the
CONTROL PANEL is used to define each Synchro/Resolver card type in the
system and the address for each Synchro/Resolver card. The MOTION
FEEDBACK BOARD MANAGER Application is installed in the CONTROL
PANEL during the setup.exe installation. The MOTION FEEDBACK BOARD
MANAGER Application will route the information to the appropriate routine for
the card type selected.

CONSOLE APPLICATION

An executable application using the synchro.dll is included with the

SB-3622X

PCI card to demonstrate the capabilities of the card. Upon

installation, there will also be source code examples of a program that can be
compiled.

SYNCHRO.DLL FILE (FUNCTION CALLS)

The synchro.dll (Dynamic Link Library) has been created to provide a
programmer with routines (Function Calls) that perform the low-level read and
write functions to the registers on the Synchro/Resolver cards. The

Function

Calls

section of this manual describes the routines available from the

synchro.dll.

DATA SIMS

dataSIMS

software support is available, contact DDC Software Applications

for details.

«
...
22
23
24
25
26
...
»

Содержание DRC-11525






















































































Отзывы:

Нет отзывов

Похожие инструкции для DRC-11525

ILDA Gem Laser projector tool

Бренд: Stanwax Laser Страницы: 3

Бренд: HARTING Страницы: 13

Бренд: National Instruments Страницы: 130

Бренд: M86 Security Страницы: 309

Бренд: QTech Страницы: 406

PCard-E 021L-D5 Series

Бренд: ORiNG Страницы: 2

Бренд: VIA Technologies Страницы: 2

Internal All-in-One Digital Media Drive ULT31793

Бренд: Ultra Products Страницы: 1

Бренд: SilverStone Страницы: 2

Бренд: Roland Страницы: 224

Бренд: Proxim Страницы: 65

PC/104-PCMCIA-1

Бренд: Kontron Страницы: 20

Бренд: Sennheiser Страницы: 22

Бренд: BenQ Страницы: 38

Бренд: Arduino Страницы: 10

BD7682FJ-EVK-301

Бренд: Rohm Страницы: 6

Бренд: Advantech Страницы: 59

7800 SERIES RM7895A

Бренд: Honeywell Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды