DDC BU-67121W, Руководство по оборудованию

Страница: 59 / 71

C O N N E C T O R S A N D P I N O U T S
Data Device Corporation BU-67121W Manual
www.ddc-web.com Rev B – 6/16
51
8.3.5 AIC J4 Connector
Figure 41. AIC J4 9-Pin D-Sub Connector
Table 12. J4 9-Pin D-Sub Connector Pinout
J4 9-Pin D-Sub 1553 Mini PCI-e Site B 429 Min PCI-e Site B
1 MIL_STD_1553_A1-
D_IO_2
2 MIL_STD_
D_IO_1
3 MIL_STD_
D_IO_3
4 MIL_STD_1553_B1-
D_IO_4
5 CHASSIS GND
CHASSIS GND
6 MIL_STD_1553_A2-
D_IO_6
7 MIL_STD_
D_IO_5
8 MIL_STD_
FLASH_WRITE_ENABLE
9 MIL_STD_1553_B2-
BOOT_FROM_BACKUP_L
8.3.6 Mini PCI-e Site B with non-DDC card
J3 and J4 can be used with a non-DDC mini PCI-e card. The user will have to create
their own cable to connect from their card to the onboard header to route the signals
to the front connectors. The tables below shows you the pins of the onboard header
and how they map to the D-Sub connectors.
Table 13. AIC D-Subs to 20-pin onboard header pin out
AIC J3 9-Pin D-Sub 20-pin header (J18 on PCB)
1 2
2 1
3 4
4 5
5 3,6,9,12