DCT e-track, Руководство пользователя

Страница: 34 / 212

2 Operation
e-track
TM
’s operates on an automatic basis according to an user-
defined configuration which can be modified at any time locally or
remotely using the GSM/GPRS network.
The unit does not requires any starting command/action to start
working: Once a valid configuration is loaded the unit is ready to
work.
Follow the Assisted Configuration or the Manual Configuration in
order to have the minimal operational parameters.
Note:
Many configuration scenarios are possible, the most common one for
the unit’s operation is to have it report a periodic
status event to
an IP address
1
according to a Time And Distance
2
or turn-by-turn
criteria and also set the unit to report other sort of events as an
exception to this normal Tracking Reporting. Such an example is
to configure the unit to report a one-click button press event to the
same IP address and to a phone number via SMS to generate an ex-
ceptional one-time Location Report.
For information on how to configure the unit refer to the Assisted
Configuration or Advanced chapters.
2.1 Powering the unit
e-track
TM
can run on battery or with permanent external USB power.
When running on battery, the
system
LED (red) blinks
3
, when run-
ning on USB power the LED remains solid when the unit is fully
charged or will blink (differently from the running on battery blink)
when it is charging.
1
Running a Tracking Server.
2
A Time And Distance criteria is preferred over a Time-only criteria
3
See the LEDs section on the About chapter