DCT e-track, Руководство пользователя, Страница: 106 / 212

4.22. SCENARIOS AND EXAMPLES (SCRIPTS)
>
SXADP1010912345678
<
Refer to the
XADP
message for more information. The underlined
value indicates the access parameter for this DP, indicating that the
Phone Number 912345678 has TAIP console access via SMS messages.
Now that we are clear on the access level of the Phone-Number-type
DP, interacting with the unit is a matter of sending TAIP commands
through SMS messages and waiting for response as incoming SMS
texts.
Query the unit with a SMS
To ask for the current position-velocity information of the unit, sent
from the Phone Number 912345678 an SMS with the query:
>
QPV
<
The unit will respond with an SMS containing the text:
>
R0000000000112012
<
4.22.4 Adding voice interaction
The unit may receive or make calls from/to any of the Phone Number-
type defined
Destinations . To initiate a voice call to a DP the
XAVC
message is used. To receive voice calls the remote Phone Number has
to be defined on a Phone-Number-type destination and the
Access
parameter on the
DP
definition has to indicate that an incoming call
from that DP is to be answered.
Make the unit accept a phone call
To do so the Access parameter on the corresponding DP has to indi-
cated voice call access. In our previous example the 912345678 Phone
Number was defined with the
XADP
messages as follows:
>
SXADP1010912345678
<
The Access is such that voice calls from that number are to be an-
swered.
Also, the
XAVR
command must be set so that incoming voice calls
are enabled. Any incoming call from the 912345678 is now going to
be answered. Depending on the
XAVR
command, the call is automat-
ically answered or answered when the button is pressed. The voice
call is maintained until the
912345678 decides to hung-up or when
pressing the button.
104