DCS Delius Скачать руководство пользователя страница 69

Страница: 69 / 80

dCS Delius

User Manual

Manual for Software Issue 2.3x

dCS

Ltd

September 2004

Manual filename: Delius Manual v2.3x.doc

Page 69

email: [email protected]

English version

web-site: www.dcsltd.co.uk

Troubleshooting the IEEE 1394 Interface

This section covers difficulties that may be encountered using a

dCS Verdi

SACD Transport (v1.20 or later), a

dCS Verdi La Scala

Upsampling SACD

Transport or a

dCS Purcell

Upsampler to drive a

dCS Elgar Plus

DAC (v4.20 or

later) or

Delius

DAC (v2.20 or later) with DSD data over an IEEE 1394 interface.

Upsampler or Transport displays “

Inactive

”

•

This can happen momentarily during locking. If it does not change to

Active

, open the Transport or Upsampler’s menu and ensure the

Transmit

page is set to

Active

The Unit keeps displaying

“No Comms”

•

This will appear briefly while the 1394 system is checking for connections.

•

the

No Comms

message does not clear, ensure that all units in the 1394

chain are switched on and securely connected by 1394 cables.

The Unit keeps displaying

“Search..”

•

This will appear briefly after the 1394 system has established

communications.

•

the

Search

message does not clear, ensure that you have not connected

both 1394 connectors from one unit to both 1394 connectors on another unit
or set up a loop. This prevents the 1394 bus settling.

•

Check that the 1394 cables are correctly fitted.

The DAC displays

“Verdi Wordclock Missing”

•

With the DAC in slave mode, check there is an undamaged BNC cable

connecting

Verdi

’s

WClk Out

to the DAC’s

WClk In

•

Ensure the cable is D.C. coupled. A.C. coupled cables are not suitable for

use with Wordclock or SDIF.

The DAC displays

“Missing Wordclock between Clk Out & Verdi Clk In”

•

With the DAC in master mode, check there is an undamaged BNC cable

connecting the DAC’s

WClk Out

Verdi

’s

WClk In

•

Ensure the cable is D.C. coupled. A.C. coupled cables are not suitable for

use with Wordclock or SDIF.

The DAC displays

“Please check source slaved to DAC Wordclock Out”

•

With the DAC in master mode, check there is an undamaged BNC cable

connecting the DAC’s

WClk Out

to the source’s

WClk In

•

Ensure the cable is D.C. coupled. A.C. coupled cables are not suitable for

use with Wordclock or SDIF.

The DAC displays

“Wrong Wordclock @ Verdi Clk In”

•

Verdi

La Scala

has detected a clock frequency other than 44.1kHz on it’s

WClk In

connector. Ensure the clock source is set to 44.1kHz.

•

With the DAC in master mode, check there is an undamaged BNC cable

connecting

Verdi

La Scala

’s

WClk Out

to the DAC’s

WClk In

•

Ensure the cable is D.C. coupled. A.C. coupled cables are not suitable for

use with Wordclock or SDIF.

Содержание Delius

















































































Результаты поиска

Содержание Delius

Отзывы:

DCS Delius, Руководство пользователя, Страница: 69 / 80

Результаты поиска

Содержание Delius

Отзывы: