DCS Delius Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 80

DCS Delius Скачать руководство пользователя страница 58

dCS Delius

User Manual

Manual for Software Issue 2.3x

dCS

Ltd

September 2004

Manual filename: Delius Manual v2.3x.doc

Page 58

email: [email protected]

English version

web-site: www.dcsltd.co.uk

O

PTIONS

The following options may be fitted to new units or retrofitted at a later date.

Option code

Option

1394

IEEE 1394 interface

V5

Mains voltage set to 230/240V

V4

Mains voltage set to 215/220V

V3

Mains voltage set to 200V

V2

Mains voltage set to 115/120V

V1

Mains voltage set to 100V

Table 9 – Options available

IEEE 1394 Interface

We can fit an IEEE 1394 interface to enable the unit to generate / receive DSD
data on either of two 6-way connectors. The cost of this option depends on the
age of your unit. Note the full serial number of your unit and contact your

dCS

distributor for advice. This option must be fitted at

dCS

to allow full checking.

See the “Rear Panel” section on page

and “IEEE 1394 Overview” on page

Mains Supply Voltage

Any unit may be set for operation from 230/240V, 215/220V, 200V, 115/120V or
100V A.C. Units are shipped set for the mains supply voltage according to the
destination. The voltage setting can be updated later by your dealer, if
necessary. Specify the new country of use or the new voltage setting.

Having Your Options Changed

dCS

support modifications, updates and option changes to supplied units. Major

changes are normally carried out at

dCS

as we have extensive test facilities and

can verify the changes. Please contact your dealer / distributor or

dCS

for

details.

IMPORTANT!

Please do not attempt the changes yourself. The unit’s performance or
reliability may be impaired and the warranty will be invalidated.

«
...
56
57
58
59
60
...
»

Содержание Delius

















































































Отзывы:

Нет отзывов