Instruction manual LS2670 SET BEAUTY
dcg16.it
10
b)Epilating
- Press the bunon to change head parts, press both sides of razor head with
thumb, remove bead parts install epilator parts and then use
- Select speed 1 for areas with little hair growth, for hard-to-reach areas
and for areas where bones are located directly beneath the skin, such as
knees and ankles
- Select speed 2 for larger areas with stronger hair growth
- Stretch the skin with your free band to make the hairs stand upright
- Place the epilator perpendicularly onto the skin with the On/Off slide
pointing in the. direction in which you are going to move the appliance
- Move the appliance slowly over the skin, against the direction of hair
growth
- Switch the appliance off by pushing the On/Off slide pointing 0
2.Chargjng
- Turn off the switch and connect transformer with machine, then switch on
the power, it indicates well recharging when the indicator lights
- It takes about 8 hours to charge the epilator completely, or it will affect
battery life and even cause unnecessary circuit damage.
- It can be charged after fully release power so as not to affect the charging
- After charging, shave and epilate as shown in a& b.
CLEANINGAND MAINTENANCE
For a good and smooth epilating result, it is essential that you clean the
epilating head after each use.
- Switch the appliance off
- Clean the epilating discs of the epilating head and all other parts that have
become accessible with the brush supplied
- Do not use aggressive cleaners, scouring agents, petrol, acetone etc. to
clean the plastic housing of the appliance.
- Never try to remove the epilating discs from the epilating head.
