58
Processing Modules & Parameters
This section of the manual provides descriptions of all the processing modules available in the VENU360, their associated
parameters, and how to edit them.
Inputs Module
The standard VENU360 model has 7 fixed inputs. The input assignments are: IN1: Analog1, IN2: Analog2, IN3: Analog3, IN4:
AES1, IN5: AES2, IN6: AES3, and IN7: AES4. The VENU360-B and VENU360-D models allow these inputs to be configured
between the standard inputs listed above or BLU link/Dante channels depending on model. See
for information on editing BLU link and Dante input channel assignments.
The Inputs module is fixed at the beginning of the processing chain and has no parameters to edit. It can be used for
referencing the input channel assignments and provides direct input signal level metering and clip indication. These direct input
meters and clip indicators can also be seen in the “Input Meters” home screen. See
for
more information on the available home screens.
To view the Inputs module:
1. Press the EDIT button.
2. Select the Inputs module using
the SELECT wheel and UP/DOWN
buttons. Press the SELECT wheel
to enter the module’s menu.
3. Use the SELECT wheel or UP/
DOWN buttons to navigate the
menu.
